UV Flame Detectors


Our UV Flame Detector, equipped with a microprocessor for advanced electronic signal analysis, is adept for both indoor and outdoor use. With its non-corrosive housing, it's particularly suitable for indoor industrial settings prone to corrosion. Capable of detecting UV energy emitted by various fires, including hydrocarbon and non-hydrocarbon, it's designed to alarm in scenarios like Arc Welding, with an 8-10 second delay to minimize false alarms. This versatile detector finds applications in a range of
settings, from Hydrogen and Radio Amplifiers to chemical Heating Rooms and laboratory Fume Hoods. Additionally, it undergoes hourly self-tests to ensure optimal sensor and electronics functionality, with a Test Lamp available for routine inspections and end-to-end testing.

UV Flame Detectors

Product Specifications UV Flame Detector

Sensitive to virtually all fires, including Hydrogen Flames, with performance comparable to UV/IR flame detectors.

Resistant to artificial and sunlight.

Automatic sensor test for reliable operation.

ATEX certified for use in hazardous environments: II 3G Ex nA IIC T4 Gc, II 3D Ex tc IIIC T 71°C Dc IP65,
ambient temperature range: -25° to +70°C.

Suitable for both indoor and outdoor applications.

Operating temperature range: -40 to +70°C (in Safe Areas only).

Constructed with a GRP housing for durability.

cFMus class 3611 certified (Nonincendive, Class I, II and III, Div 2), ambient temperature range: -25° to

Features relay output for Alarm and Fault indications.

Provides sinking 4-20 mA output (stepped) for easy integration.

Certified to CPR-EN54-10 standards and approved by FM class 3260.

California State Fire Marshal (CSFM) listed.

Covered by a 5-year WARRANTY for peace of mind.

Model Specifications


UV-185/5CZ: This model is approved under CPR/EN54-10 standards and suitable for
ATEX category 3 for zone 2/22. It's also approved by FM class 3260 and cFMus class 3611.



ATEX category 3 for zone 2/22

FM class 3611 and 3260